Цифровое устройство многоканальной длительной звукозаписи цифрового протокола «AMUR-PCI-BRI-6»

Purpose:

BRI adapter (further in the text - device) is intended for transformation of ISDN BRI (2В1D) digital protocol into analogue signal in a stereo or a mono mode.

 

Order    Download
 
 
 

Purpose:

 

The device is intended for continuous round-the-clock work indoors at temperature from 5 ° to 40°С and related humidity of 80% (at temperature 25°С), in accordance with 15150 State Standard Specification. The device is compatible with subscriber lines of the public switched telephone network (PSTN) and the telephone sets corresponding to 71 53-85 State Standard Specification.

Specifications:

 

Connecting to the digital telephone network
parallel
DC input resistance
not less than 1 MOhм
AC input resistance
not less than10 кОhм
The length of the cable for connecting to the digital telephone line
up to 10 m
Galvanic isolation between input, output and power supply
 
The maximal tested voltage between input and output
1 кV
The maximal tested voltage between input and supply
630 V
Supply voltage of the equipment
stabilize, 20±28 V
Polarity of supply connection
any
Consumption current in the established mode
up to 70 мА
Power consumption
2 W
Low-frequency analogue signal output
stereo/mono
The maximum amplitude of the output analogue signal for each stereo-channel without load
±3 V
Voltages nominal load to the subwoofer output of each channel
600 Ohм
The maximum cable length for remote power-up
100 m